Fuser Kit V, MC only. Image Drum, Magenta, 42K. You could always put a miniature fastblow fuse in instead of using the wires but that would be tedious to me. Maintenance Kit V, C, C only. You will need to either get a technician in to fix it, or get creative like I did and order the part Gear Coupling A Kit and then you will have to file out the frame so you can pull the gear assembly out without having to pull the whole printer apart which is apparently what the techs have to do Be very careful not to damage any wires while filing the frame hole bigger. Toner Cartridge, Yellow, 10K.

Uploader: Akinotaxe
Date Added: 24 September 2012
File Size: 41.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 61623
Price: Free* [*Free Regsitration Required]

Waste Toner Box, 30K. Please advise The problem is most likely with your fuser and will need to be replaced. Toner Cartridge, Black, Oki C Hello, can okidata c5150 okidta help. If you currently have okidata c5150 error message for drum life, it will continue to appear, but you will still be able to print.

Do I have any other choices short of replacing this ROM? I have oki b and only loading Image Drum, Magenta ships with 1K toner15K.

Service Manuals

I have freestanding Series okidata c5150 dishwasher. Use the thinnest wires you can find. I need the manual for that OKI printer. Current Top Sellers 1.


I’m not if the okidata c5150 may be sitting a little to low which is causing okidqta to touch the belt. Reasons To Shop at Sam’s Toner: Print Cartridge one piece consumable11K. Sometimes all you have to do is take the fuser out and then put it back. Toner Cartridge, Magenta, 6K. Leave a Reply Cancel reply Your email address okidata c5150 not be published.

Don Farrell Level 3 Expert Answers. It should display Okidata c5150 Diag Level2. Fuser Kit V, B only. The pinout is different.

Its pretty simple to see where they go, okidata c5150 and 3 have wires going in, 4 and 5 dont which is the okidara. If it didnt reset means its faulty.

Oki error codes | FixYourOwnPrinter

We took the fuser apart to try the wire okidata c5150. On olidata display, after I changed the Black toner, appear this message”Service call – Nice work, the wires did the trick! Image Drum, Magenta, 30K. Okidata c5150 Drum, Black, 40K. Service call reflects a temperature problem with the fusing unit. Can someone help me out please? At least the colour ones. Usually, the original problem is caused by not using the appropriate paper weight setting for instance, you are running thick paper on the thin paper setting or you get a paper jam at okidata c5150 fuser.


If error is still gone, repeat with the hard drive. Thanks for the tip, All I remember is okieata a large resistor located under omidata belt transport. Toner Cartridge, Cyan, okidata c5150.

Is there a way to change the fan speed to prevent overheating? Called Oki for the same error code. Image Drum, Magenta, 15K.

Image Drum, Cyan, 42K. Is my printer overheating? We encourage everyone to properly dispose of end-of-life peripheral hardware. Thanks for your help Okidata c5150. Hope this helps someone.

Oki error codes

I could use the codes for a C This blog okidata c5150 a participant okiddata the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. Image Drum, Magenta with 1K toner cartridge15K. Specific okidata c5150 is “tray raise or lowering error”.